Bed formation

Date :13 th June.

                                      

Bed preparation

 For bed preparation the material used are washed or cleaned with solutions.              

 Water =5 litre.          

 Formaldehyde = 8ml   

 Bavistine =5 gm.                                               

1.weight of spawn = 1packet of 500gm. Total weight =1.5 kg. 

2.weight of bed =total weight of each bed.

Procedure for formation of bed:

1.Before begin,washed our hands and clean all surfaces and corners of used poluthene bags .

2.The straw with 60%water packed on rebust plastic bags with straw quite tightly.

3.Then distribute some of mushrooms spawn throughout the straw after every 4-5 cm layer.The straw should not be drippimg wet but it should be damp from the sterilization.

4.At this stage,make holes in the bags every 3 inches.This let some air in but not too much.

5.After that beds kept out of direct sunlight and it is best arround 20-30 degree celcius. 

6.Wait while the mushroom spawn develop into mycelium and begins taking over the entire bags.